ACCESSORIES

GRINDING WHEELS FOR SSM-2:
Grinding Wheel S-2/KB60 Grinding Wheel S-2/KB80 Grinding Wheel S-2/60 Grinding Wheel S-2/80
S-2/KB60
* Blue grinding wheel
* Good inherent balance
* Good on carbon steel
* Good on stainless steel
* Grit size 60-70
* Contains special grit
* Good micro-finish
* Keeps its sharpness longer
* Quick removal of material		 S-2/KB80
* Light blue grinding wheel
* Good inherent balance
* Good on carbon steel
* Good on stainless steel
* Grit size 80-100
* Contains special grit
* Excellent micro-finish
* Keeps its sharpness longer		 S-2/60
* Pink grinding wheel
* Good inherent balance
* Good on carbon steel
* Grit size 60
* Contains standard grit
* Quick removal of material		 S-2/80
* White grinding wheel
* Good on carbon steel
* Grit size 80
* Contains standard grit
* Good micro-finish
Distance ring There is a distance ring that will change the inner diameter from 38 to 20 mm. Use it on older SSM-2 models.

GRINDING WHEEL FOR SSM PROFIL:
Grinding Wheel S-4/KB60 S-4/KB60
* Blue grinding wheel
* Good inherent balance
* Good on carbon steel
* Good on stainless steel
* Grit size 60-70
* Contains special grit
* Good micro-finish
* Keeps its sharpness longer
* Quick removal of material

DIAMOND DRESSERS AND WHETSTONES:
Diamond Dresser D-80 Diamond Dresser D-2000 Diamond Dresser D-50 Whetstone Diamond Whetstone
D-80
* Natural Diamond
* Good Quality
* Pivot device
* Flat surface device		 D-2000
* Synthetic Diamond
* Rod-shaped
* Long lifetime
* Same sharpness
* Pivot device
* Flat surface device		 D-50
* Natural Diamond
* Good Quality
* Small in size
* Flat surface device		 B-SSM
* Ceramic Whetstone
* Double-sided
* Grit size 320		 DB-SSM
* Diamond Whetstone
* One-sided
* Precision tool
* Grit size 800

TUBE RIVETS, COPPER RIVETS AND EYELETS:
Tube Rivets Copper Rivets + Washer Eyelets Figure Skating Hooks
SN
* Tube Rivets
* Fastening of skate blades
* Length available (mm):
10, 12, 14, 16, 18, 20, 22, 24		 KN
* Copper Rivets + Washer
* Fastening of skate blades
* Length available (mm):
          26 and 32		 EL
* Eyelets
* Black
* For lacing on skates		 FE
* Figure skating hooks
* White
* For lacing on skates
* For figure skates

VARIOUS ACCESSORIES:
Blade Edge Checker

BEC           NEW!

This is a blade edge checker that enables you to easily control that the sharpening is centered underneath the skate blade.
Blade Straightener

SKR           NEW!

This is a blade straightener for temporarily bending back a skate blade that has been hit and deformed during e.g. a game.
Transport Case V-2

V-2

Transport case for SSM-2.
V-2 is very durable to thrusts and other abuse.
It has a tool holder inside.
Dust Extractor U-840 U-840
For removal of grinding dust and particles we recommend and sell the dustcleaner U-840, a welding fume eliminator produced by Nederman. It should be attached to SSM-2 and SSM PROFIL when sharpening to minimize the discharges. It has an exchangable filter (U-324) and keeps the same vacuum strength until the filter is full. A filter will be sufficient for approximately 2000 pairs of skates and is treated with flame retardant.
Click here for the Nederman U-840 manual.